What would you like to do?
|
Recommended Script
|
Send the same configuration commands to a group of routers
|
config_devices
|
Send configuration commands to a group of routers but the actual configurations commands are different for each router.
|
config_devices_rcf
|
Send a set of non-configuration commands (e.g. show ip route) to a group of routers.
|
cisco_send_cmds
|
Send a set of non-configuration commands (e.g. show ip route) to a group of routers and have the output from each router saved to individual files.
|
cisco_send_cmds with the -dir option
|
Send a set of non-configuration commands to a group of routers but the actual commands are different for each router.
|
cisco_send_cmds_rcf
|
Perform a clear counters on a set of routers.
|
cisco_send_cmds
|
Backup the router configs for a set of routers to a TFTP server
|
copy_to_tftp
|
Backup the router configs for a set of routers but the routers do not have access to a TFTP server
|
conf_bkup_show_run
|
Change any of the following passwords on a set of routers:
|
cisco_passwd_change
|
Send the same command(s) to a group of switches running CatOS
|
catos_send_cmds
|
Send the same command(s) to a group of PIX Firewalls
|
pix_send_cmds
|
Backup the configurations for PIX Firewalls (using show run)
|
pix_send_cmds with the -dir option
|
Verify any-to-any network connectivity by performing pings from a list of routers to a list of IP Addresses
|
pinger
|
Verify packet paths through the network by performing traceroutes from a list of routers to specified IP Addresses.
|
tracer
|
Collect IP Accounting information from a set of routers
|
ip_account
|
Encrypt the password/login file
|
encrypt_logins
|
Get an IOS Version Report for all routers in the network
|
ios_report
|
Get a list of all parts and Serial Numbers for all IOS devices in the network
|
cisco_inventory_rpt
|